Melt-blown Parameters Ceramic Heater
High working temperature, fast heating, high thermal efficiency, uniform and accurate heating, long service life of ceramic electric heating ring, easy installation and maintenance, low operating cost, etc. Supply 3W melt-blown fabric ceramic heater
Precautions:
1. Melt-blown Parameters Ceramic Heater Ceramic electric heater is not waterproof, so avoid contact with oil, water, and plastic pellets during storage and installation to prevent electric leakage.
2. During installation, the ceramic electric heater must be closely attached to the heated body, and the surface of the heated body should be flat and complete without unevenness.
3. If a burnt black color appears on the surface after use, it indicates unbalanced heat dissipation between the heating element and the heated body. Adjust promptly to prevent burn-through.
4. When using high-temperature ceramic electric heaters, avoid forceful impact or collision with hard objects to prevent tile breakage and exposure of alloy resistance wire, which affects service life.
5. Before installation, check whether the installation position matches the specifications of the ceramic electric heater and whether the operating voltage is consistent.
Usage Precautions
. Fast heat transfer, uniform heating, stable operation.
2. No temperature leakage, energy saving, outer cover not hot to touch, safe operation.
3. High power, using ceramic strip wire threading method, power is 0.5~1.5 times higher than ordinary ones.
4. High-temperature resistant heating wire, with fast heat dissipation, uniform heating, high-temperature stability, can be used for a long time at 600-800℃.
5. Long product life, due to slow aging of raw materials at high temperature, the product has a long service life.
6. Meets all technical requirements of national standard GB, power deviation +5% to -10%.
7. Electrical strength: Withstands 1500V/50Hz sinusoidal AC voltage test for 1 minute without breakdown.
8. High mechanical strength, good thermal insulation performance, large contact area with heated object, long service life.
9. Easy installation and maintenance, low operating cost, even if the internal heating material is damaged, the external ceramic parts can still be reused.
10. Emits far-infrared and radiant heat, with emissivity up to 91%, 1.5 times that of PTC heaters.
1. High-temperature ceramic heater is not waterproof, so avoid contact with oil, water, and plastic pellets during storage and installation to prevent electric leakage.
2. During installation, the high-temperature ceramic heater must be closely attached to the heated body, and the surface of the heated body should be flat and complete without unevenness.
3. If a burnt black color appears on the surface of the high-temperature ceramic heater after use, it indicates unbalanced heat dissipation between the heating element and the heated body. Adjust promptly to prevent burn-through.
4. When using high-temperature ceramic heaters, avoid forceful impact or collision with hard objects to prevent tile breakage and exposure of alloy resistance wire, which affects service life. Melt-blown Parameters Ceramic Heater
5. Before installation, check whether the installation position matches the specifications of the high-temperature ceramic heater and whether the operating voltage is consistent.
