SUTE13 Flange-type Electric Heater (Core) Detailed Information
SUTE13 Flange-type Electric Heater (Core)
Product Use: Heating various liquids and gases. Specific dimensions (such as outer diameter, length, etc.) can be customized according to customer requirements.
Protection Level: IP45～IP68 (determined based on actual needs)
Design Power: 1KW～2000KW (calculated based on actual working conditions)
Working Temperature: 20～1050℃ (determined based on actual needs, with stepless temperature control)
Working Pressure: 0.6～20Mpa (determined based on actual working conditions)
Working Voltage: 220V/380V (determined based on actual needs)
Temperature Control Accuracy: ±1℃
Temperature Control Method: Intelligent automatic constant temperature (PLC programming control can be used if needed), with over-temperature, over-pressure, phase loss, overload, open circuit, short circuit, ground fault alarms, and dry-burn protection. It can be interlocked with fans, circulation pumps, compressors, and other power equipment driving the medium.
The electric heater core is installed inside the electric heater container. It is an internationally popular high-quality long-life electric heating device. It is used to raise, maintain, and heat the temperature of flowing liquid or gaseous media. When the heating medium passes through the heating chamber of the electric heater under pressure, it uniformly carries away the huge amount of heat generated by the electric heating elements during operation using fluid thermodynamics principles, raising the temperature of the heated medium to meet the user's process requirements. Working Principle: A circulating electric heater is a device that converts electrical energy into heat energy to heat the material to be heated. During operation, the low-temperature fluid medium enters the input port through a pipe under pressure, follows a specific heat exchange channel inside the electric heating container designed based on fluid thermodynamics principles, and carries away the high-temperature heat energy generated by the electric heating elements during operation, raising the temperature of the heated medium. The high-temperature medium meeting process requirements is obtained at the outlet of the electric heater. The internal control system of the electric heater automatically adjusts the output power based on the temperature sensor signal at the outlet, ensuring uniform medium temperature at the outlet. When the heating element overheats, the independent overheat protection device immediately cuts off the heating power supply, preventing the heated material from overheating, coking, deteriorating, or carbonizing, and effectively extending the service life of the electric heater.
SUTE13 Flange-type Electric Heater (Core) Application Scope
Typical applications mainly include:
1. Heating of chemical materials in the chemical industry, drying of some powders under certain pressure, chemical processes, and spray drying.
2. Heating of hydrocarbons, including crude oil, heavy oil, fuel oil, thermal oil, lubricating oil, paraffin, etc.
3. Heating of process water, superheated steam, molten salt, nitrogen (air), water gas, and other fluids that need to be heated.
4. Due to the advanced explosion-proof structure, the equipment can be widely used in chemical, military, petroleum, natural gas, offshore platforms, ships, mining areas, and other places requiring explosion protection.
Operating Conditions
Working conditions and installation site of the electric heating system
Ambient temperature: -15～45℃ *Relative humidity: 46%～91% *Altitude: Above sea level
Control system: Installed indoors, non-corrosive, non-explosion-proof area; field operation box integrated with the equipment as a skid mounted in Zone 2 explosion-proof area
Electric heater: Installed indoors or outdoors, non-corrosive, Zone 2 explosion-proof area
Features
1. Small size, high power: The heater mainly uses bundled tubular electric heating elements.
