Used for heating hydraulic oil and lubricating oil in hydraulic and lubrication devices, also can be used to heat non-corrosive gases or liquids.
Product Features:
The product consists of a heating core and a sheath. The heating core uses high-temperature resistant alloy electric heating wire as the heat source, high-temperature resistant ceramic as the insulating medium, and the sheath is made of cold-drawn seamless steel pipe or stainless steel.
The electric heater is connected to the oil tank body by flange. The sheath isolates the heating core from the heated oil. When replacing the electric heater, there is no need to drain the oil in the tank; only the heating core needs to be pulled out and replaced with a new one, making maintenance convenient.
The electric heater has a large contact area with the heated oil, low surface power, no carbon deposition, and the oil will not carbonize due to local high temperature. Long service life, safe and reliable.
Technical Parameters:
Rated voltage: Single-phase 220V, Three-phase 380V
Surface heating power: ≤3W/CM2
Operating temperature: ≤300℃
Working medium: Mineral oil
Working pressure: ≤0.8Mpa
IV. Specifications and Dimensions (Figure 1)
Model HRY1 HRY2 HRY3
Voltage
V Surface Power
w/cm2 Dimensions mm Voltage
V Surface Power
w/cm2 Dimensions mm Voltage
V Surface Power
w/cm2 Dimensions mm
L L1 L L1 L L1
1KW 220 1.4 440 360 380 1.4 440 360
2KW 380 1.0 1200 1120 220 2.0 590 510 380 2.0 590 510
3KW 220 2.1 790 710 380 2.1 790 710
4KW 380 1.8 1200 1120 220 2.2 1000 920 380 2.2 1000 920
5KW 2.3 1200 1120
6KW 380 2.8 1200 1120
Keywords: SRY6-2 1KW220VAC Sheath Electric Heater, SRY6-2 1KW220VAC Sheath Electric Heater
