Meltblown High-Quality Ceramic Heater Manufacturer
The meltblown cloth ceramic heater is built with a stainless steel shell, inside which ceramic with high insulation and fire resistance is threaded with resistance wire, then mechanically twisted into shape. It can be used once connected to power.
Meltblown High-Quality Ceramic Heater Manufacturer is suitable for plastic injection molding machines, chemical industry, barrel heating devices of extruders, and various pipeline heating. The ceramic electric heating ring has a beautiful appearance, stable performance, corrosion resistance, fast heating, uniform heat dissipation, good insulation performance, high voltage resistance, high working temperature, fast heating rate, high thermal efficiency, uniform and accurate heating, long service life, easy installation and maintenance, low operating cost, etc.
The inner tank of the air electric heater is made of 304 stainless steel, the heating element is a stainless steel electric heating tube, and multiple baffles are set on the flange heater to prolong the residence time of air in the heater cavity, thereby improving heat exchange efficiency. According to the required air flow and temperature, the heating power is reasonably designed. Under allowable conditions, appropriately increasing the heating power of the air heater can shorten the preheating and heating time for production line startup.
Product Structure:
It is made with a stainless steel shell, inside which ceramic with high insulation and fire resistance is threaded with resistance wire, then mechanically twisted into shape. It can be used once connected to power.
Product Parameters:
* Fast heating: reaches 500°C in 30 seconds
* Thermal efficiency over 90%, 1.5 times that of PTC heaters
* Power can be arbitrarily from 50W to 2000W
* Voltage can be arbitrarily from 12V to 380V
* Shape not limited by appearance (can be customized)
* Uses new foreign technology of honeycomb ceramic heating elements
* Resistant to water, acid, and alkali
* Uses ceramic plate heating, no red light, no combustion, fast heating, reaches 500°C within 30 seconds.
* Below 500°C, no open flame, no oxygen consumption, no oxidation, no dry mouth or tongue, can deodorize, keep indoor air fresh.
* Thermal efficiency up to 90% or more, 1.5 times that of PTC heaters, 2 times that of traditional electric wire heaters, saving 30% energy and electricity costs.
* Emits far-infrared and radiant heat, with emissivity up to 91%.
* Does not burst when exposed to water, resistant to acid and alkali, suitable for harsh environments.
* No surge current at startup, temperature can be kept constant.
* Ceramic heater suitable for: makeup, facial masks, rheumatism, joint pain relief. Besides warming the room, it is extremely effective for warming cold and aching feet of office workers and practitioners. Meltblown High-Quality Ceramic Heater Manufacturer
* Operating voltage 12V-380V arbitrary, power 50W-2000W arbitrary.
