Product Details

SUTE02 Mica Heater
SUTE02 Mica Heater is mainly used in plastic injection molding machines, heating parts of blow molding machine heads, and heating systems of extrusion components, with an operating temperature of up to 350°C.
Details:

SUTE02 Mica Heater Product Introduction

Mainly used in plastic injection molding machines, heating parts of blow molding machine heads, and heating systems of extrusion components, with an operating temperature of up to 350°C. It has the advantages of small size, small footprint, fast heating, beautiful appearance, and good heat exchange capability. It is an indispensable heating element in the rubber and plastic industry both in China and internationally, with a maximum surface load of 6.5W/cm².
SUTE02 Mica Heater Specification Table

Model	Dimensions (mm)	Voltage (V)	Power (W)	Main Technical Indicators
LK-YM-Φ55Χ80	Φ55Χ80	230	800	1. Operating conditions: Ambient temperature -20～+60°C Relative humidity <80% 2. Leakage current: <0.5MA 3. Insulation resistance: ≥5MΩ 4. Ground resistance: <0.1Ω 5. Dielectric strength: 1500V, no breakdown for 1 minute 6. Temperature resistance: 500°C 7. Power tolerance: +5%-10%
LK-YM-Φ120Χ141	Φ120Χ141	230	2000
LK-YM-Φ120Χ51	Φ120Χ51	230	520
LK-YM-Φ80Χ60	Φ80Χ60	230	775
LK-YM-Φ58Χ43	Φ58Χ43	230	250
LK-YM-Φ90Χ51	Φ90Χ51	230	300
LK-YM-Φ185Χ51	Φ185Χ51	230	1100
LK-YM-Φ130Χ66	Φ130Χ66	230	1000
LK-YM-Φ165Χ66	Φ165Χ66	230	1100
LK-YM-Φ160Χ70	Φ160Χ70	220	1000
LK-YM-Φ230Χ90	Φ230Χ90	220	2200
LK-YM-Φ154Χ94	Φ154Χ94	220	1500
LK-YM-Φ152Χ100	Φ152Χ100	220	1500
LK-YM-Φ180Χ80	Φ180Χ80	220	1300
LK-YM-Φ, , , , , , 265Χ75	Φ265Χ75	220	1500
LK-YM-Φ90Χ180	Φ90Χ180	220	1700
LK-YM-Φ90Χ60	Φ90Χ60	220	550
LK-YM-Φ120Χ80	Φ120Χ80	220	1100
LK-YM-Φ190Χ135	Φ190Χ135	220	3000
LK-YM-Φ185Χ75	Φ185Χ75	220	1500
LK-YM-Φ280Χ48	Φ280Χ48	220	1500
LK-YM-Φ300Χ100	Φ300Χ100	220	2500
LK-YM-Φ320Χ100	Φ320Χ100	220	3000
LK-YM-Φ165Χ45	Φ165Χ45	220	800
LK-YM-Φ180Χ45	Φ180Χ45	220	900
LK-YM-Φ65Χ30	Φ65Χ30	220	200
LK-YM-Φ230Χ45	Φ230Χ45	220	1000
LK-YM-Φ55Χ100	Φ55Χ100	230	1000
LK-YM-Φ80Χ70	Φ80Χ70	230	650
LK-YM-Φ70Χ70	Φ70Χ70	230	600
LK-YM-Φ85Χ45	Φ85Χ45	230	530
LK-YM-Φ110Χ100	Φ110Χ100	230	150
LK-YM-Φ102Χ70	Φ102Χ70	230	700
Customization available according to customer requirements, please refer to the ordering guide

 

SUTE02 Mica Heater Ordering Guide:
Mica Heater inner diameter is very important. Even a small error in diameter can cause installation problems, so please provide the following parameters accurately when ordering:
1. Diameter (for mica ring: inner diameter in mm or outer diameter when internal application is required; for square: length in mm)
2. Width (mm)
3. Lead wire type, length, and position
4. Position and dimensions of thermocouple holes or cutouts
5. Voltage and power
6. Single or double piece
7. Special gap width
8. If marking on the shell is required, specify the content for laser marking
9. Order quantity
10. Delivery time
* It is recommended to provide mechanical drawings or sketches when ordering.