Nonwoven Fabric Heater Portable
Function Description:
Allowable error of working voltage: not greater than 1.1 times its rated value, the shell should be effectively grounded.
Working environment: relative humidity not greater than 95%, no explosive and corrosive gases.
Dimension "B" in the outline drawing must be fully immersed in oil (and checked regularly) to avoid burning. The heated oil should be non-corrosive. When melting solid oils such as asphalt and paraffin, reduce the voltage, and then increase to the rated voltage after melting to prevent heat concentration and reduce the service life of the element. Keep the outlet end dry and clean to avoid surface flashover or short circuit. The element should be stored in a dry place. If the insulation resistance drops below 1MΩ due to long-term storage, it can be dried in an oven at about 200°C for several hours (or apply low voltage to the element for several hours) to restore the insulation resistance.
Precautions:
1. Dimension "B" in the outline drawing must be fully immersed in oil to avoid burning the component. The heated oil should be non-corrosive.
2. When melting solid oils such as asphalt and paraffin, reduce the voltage, and then increase to the rated voltage after melting to prevent heat concentration and reduce the service life of the component.
3. If carbon deposits are found on the tube surface, they must be completely removed before reuse to avoid reducing efficiency or even burning the component.
4. The component should be stored in a dry place. If the insulation resistance drops below 1 megohm due to long-term storage, it can be dried in an oven at about 200°C for several hours (or apply low voltage to the component for several hours) to restore the insulation resistance.
1. Small size, high power: The heater mainly uses cluster-type tubular heating elements.
2. Fast thermal response, high temperature control accuracy, high overall thermal efficiency.
3. High heating temperature: The maximum working temperature of the heater design can reach 850°C.
4. Uniform medium outlet temperature, high temperature control accuracy.
5. Wide application range, strong adaptability: The heater can be used in explosion-proof or ordinary occasions, with explosion-proof grade up to dⅡB and C, and pressure resistance up to 20MPa.
6. Long life, high reliability: The heater is made of special electric heating materials, with low design surface power load and multiple protections, greatly increasing the safety and life of the electric heater.
7. Fully automatic control: According to requirements, through the heater circuit design, automatic control of parameters such as outlet temperature, flow, pressure can be easily achieved, and can be networked with computers.
8. Significant energy-saving effect: The heat generated by electricity is almost entirely transferred to the heating medium.
Nonwoven Fabric Heater Portable
