Tubular Electric Heater Five-Level Assembly Equipment Components Should Be Stored in a Dry Place - Yangzhou Darui
Darui Electric recommends for you
Usage, Maintenance and Precautions
1. Dimension "B" in the outline drawing must be fully immersed in oil to avoid damaging the components. The heated oil should be non-corrosive. ()
2. For SRY3 type, the working liquid level must be below the fasteners and above the dimension line "B".
3. When melting solid oils such as asphalt and paraffin, reduce the voltage first, then increase to rated voltage after melting to prevent heat concentration and reduce component lifespan.
4. If carbon deposits are found on the tube surface, they must be removed before use to avoid reduced efficiency or even damage to the components. ()
5. Components should be stored in a dry place. If the insulation resistance drops below 1 megohm due to prolonged storage, it can be restored by drying in an oven at about 200°C for several hours (or by applying low voltage to the components for several hours).
The company was founded in 1992 and has cooperated with many large enterprises over the years. Our company's (tubular electric heater) has been supplied to many engineering companies. The company's employees create Guanfeng quality, and the Guanfeng brand () is trustworthy. The company always adheres to the development philosophy of "people-oriented, innovation; quality wins, pursuit". This makes () and other products better and better, and we sincerely provide our best service to the majority of power users.
Note: The above information and technical parameters are released by Yangzhou Darui Electric Co., Ltd.
